Электронная почта
Akustiniai stiprintuvai

EPAK2500 stiprintuvas

Цена 12519,00 €
Заказать

Описание

  • 4-way modular, 2500W Control and Amplification system for use specifically
    with ES Series modules.
  • High Frequency, 100W, Class AB, push-pull, low intermodulation amplifier
    with transformer balanced outputs.
  • Mid Frequency, 200W, Class AB, push-pull, low intermodulation amplifier with
    transformer balanced outputs.
  • Mid Bass, 600W, high efficiency, current enhancing, switching amplifier.
  • Subwoofer, 1600W, high efficiency, current enhancing, switching amplifier.
  • Complete, on board speaker management system including equalization, time alignment,
    crossover filters, amplifier overdrive protection, system set-up and output level controls.
  • AC soft start circuitry with ON/OFF AC breaker switch provides thorough power protection.
  • Passive heat dissipation design with demand-sensitive forced cooling back-up system.
  • Setup provides selection and control of different subwoofer combinations.
  • Professional enclosure using exterior-grade Baltic birch with wear resistant polymer coating.
  • Removable front cover provides storage of all AC and speaker cables.
  • Bass Character- Attack or extension switch alters the low frequency character.
  • Includes all speaker cables for a single stack ES system.

Signal Input:

  • Input Impedance     20kΩ
  • Input Sensitivity     1.0V rms
  • Line Output     Main Through ouput
  • Insert Connectors     Insert point for Sub In/ Out

 Power Connector:

  • Neutrik PowerCon®

 Product Description:

  • A 2500 watt four channel controller/amplifier pack with individual 1600W, 600W, 200W and 100W mono amplifiers.
  • Free standing unit contains all control, limiting, crossovers, phase correction, time alignment and system set up. Removable lid acts as storage for speaker cables and mains lead.

 High Frequency Amplifier:

  • Amplifier Type     Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output
  • Rated Continuous Power     100W
  • Distortion     <0.05%
  • Operating Bandwidth     2.5kHz - 28kHz

 Midrange Amplifier:

  • Amplifier Type     Class AB Push-Pull low inter-modulation Mosfet design with transformer balanced output
  • Rated Continuous Power     200W
  • Distortion     <0.05%
  • Operating Bandwidth     500Hz - 2.5kHz

 Mid-Bass Amplifier:

  • Amplifier Type     High efficiency, high current, low frequency switching amplifier
  • Rated Continuous Power     600W
  • Distortion     <0.05%
  • Operating Bandwidth     130Hz - 500Hz

 Subwoofer Amplifier:

  • Amplifier Type     High efficiency, high current, low frequency switching amplifier
  • Rated Continuous Power     1600W
  • Distortion     <0.05%
  • Operating Bandwidth     20Hz - 130Hz

 Physical Dimensions:

  • Height     700mm (27.55")
  • Width     450mm (17.71")
  • Depth     290mm (11.41")
  • Weight     32kg (70.4lbs)

 Speaker Input /Output:

  • One EP6 for ES 1.0 and one EP4 for ES series subwoofers

 Recommended Amperage:

  • Recommended Amperage     30A 115V | 16A 230V

 System Set Up:

  • Six position selector for a choice of ES subwoofer combinations

 Level Control:

  • Main input level +/- 6dB

 Subwoofer Level Control:     

  • Internal Sub level +/- 6dB

 Bass Management Switch:

  • Attack or Extension switch for alternative Bass Character

 Operating Voltage:

  • 100-120V @ 60Hz \ 230-250V @ 50Hz