Электронная почта

ES1,0 garso kolonėlė

Цена 7114,00 €
Заказать

Описание

  • Professional Baltic birch construction with wear resistant polymer coating.
  • 131dB sustained output, 134dB peak.
  • Controlled wide dispersion 90° x 40°, rotatable Mid /High horn
    for mounting in vertical or horizontal orientation.
  • New patent pending 1.75” (44mm) Nitride Titanium diaphragm compression
    driver with complex geometry phase plug and neodymium magnetic structure for
    higher output, incredibly low distortion and extended frequency response.
  • 6” Trans-Coil midrange driver, with a 1.75” (44mm) voice coil and neodymium
    magnet for increased control and output with reduced distortion and weight.
  • Horn loaded, 12” mid-bass driver with a 3” (76mm) inside/outside, epoxy
    baked, high temperature voice coil assembly and neodymium magnetic structure.
  • Three way active requirement - 900W from the EPAK 2500/R providing 600W for
    the 12” low mid, 200W for the 6” midrange and 100W for the high frequency driver.
  • Proprietary side handle design for simplified handling and carrying.
  • High impact low friction feet, asymmetrically located on three sides allowing vertical
    or horizontal system set up, lock- in and easy cabinet movement.
  • Four internal corner braces tied to eight M10 suspension points. A total of
    24 suspension points are available for custom installation applications.
  • Top hat for pole mounting applications.
  • Weather proofing option and special paint finishes available on request.

System Acoustic Perfomance:

  • -3dB Response     130Hz - 20kHz
  • -10dB Response     85Hz - 28kHz
  • Max SPL Long-term     131dB
  • Max SPL Peak     134dB
  • Crossover Point     130Hz, 500Hz, 2.5kHz
  • Impedance     Low 16Ω Mid 8Ω High 8Ω

 
Mid Range Section:

  • Acoustic Design     Horn Loaded
  • Woofer Size/ Voice Coil Diameter/ Design     6" / 1.75" / Trans Coil
  • Diaphragm Material     Epoxy Reinforced Cellulose
  • Magnet Type     Neodymium
  • Mid/ High Horn Coverage Horizontal/ Vertical     90° x 40° rotatable
  • Midrange Amplifier Requirement     200W from EPAK 2500/R

 
Mid-Bass Section:

  • Acoustic Design     Horn Loaded
  • Woofer Size/ Voice Coil Diameter/ Design     12" / 3" / Inside Outside
  • Diaphragm Material     Epoxy Reinforced Cellulose
  • Magnet Type     Neodymium
  • Mid-bass Amplifier Requirement     600W from EPAK 2500/R

 
Physical Dimensions:

  • Height     700mm (27.55")
  • Width     450mm (17.71")
  • Depth     450mm (17.71")
  • Weight     34kg (74.8lbs)

 
High Frequency Compression Driver:

  • Throat Exit Diameter/ Diaphragm Size     1" / 1.75"
  • Diaphragm Material     Nitride Titanium
  • Magnet Type     Neodymium
  • Mid/ High Horn Coverage Horizontal/ Vertical     90° x 40° rotatable
  • High Frequency Amplifier requirement     100W from EPAK 2500/R

 
Speaker Input /Output:

  • Input only EP6