ES1,0 garso kolonėlė

Aprašymas

• Professional Baltic birch construction with wear resistant polymer coating.
• 131dB sustained output, 134dB peak.
• Controlled wide dispersion 90° x 40°, rotatable Mid /High horn
  for mounting in vertical or horizontal orientation.
• New patent pending 1.75” (44mm) Nitride Titanium diaphragm compression
  driver with complex geometry phase plug and neodymium magnetic structure for
  higher output, incredibly low distortion and extended frequency response.
• 6” Trans-Coil midrange driver, with a 1.75” (44mm) voice coil and neodymium
  magnet for increased control and output with reduced distortion and weight.
• Horn loaded, 12” mid-bass driver with a 3” (76mm) inside/outside, epoxy
  baked, high temperature voice coil assembly and neodymium magnetic structure.
• Three way active requirement - 900W from the EPAK 2500/R providing 600W for
  the 12” low mid, 200W for the 6” midrange and 100W for the high frequency driver.
• Proprietary side handle design for simplified handling and carrying.
• High impact low friction feet, asymmetrically located on three sides allowing vertical
  or horizontal system set up, lock- in and easy cabinet movement.
• Four internal corner braces tied to eight M10 suspension points. A total of
  24 suspension points are available for custom installation applications.
• Top hat for pole mounting applications.
• Weather proofing option and special paint finishes available on request.

System Acoustic Perfomance:

• -3dB Response     130Hz - 20kHz
• -10dB Response     85Hz - 28kHz
• Max SPL Long-term     131dB
• Max SPL Peak     134dB
• Crossover Point     130Hz, 500Hz, 2.5kHz
• Impedance     Low 16Ω Mid 8Ω High 8Ω

 
Mid Range Section:

• Acoustic Design     Horn Loaded
• Woofer Size/ Voice Coil Diameter/ Design     6" / 1.75" / Trans Coil
• Diaphragm Material     Epoxy Reinforced Cellulose
• Magnet Type     Neodymium
• Mid/ High Horn Coverage Horizontal/ Vertical     90° x 40° rotatable
• Midrange Amplifier Requirement     200W from EPAK 2500/R

 
Mid-Bass Section:

• Acoustic Design     Horn Loaded
• Woofer Size/ Voice Coil Diameter/ Design     12" / 3" / Inside Outside
• Diaphragm Material     Epoxy Reinforced Cellulose
• Magnet Type     Neodymium
• Mid-bass Amplifier Requirement     600W from EPAK 2500/R

 
Physical Dimensions:

• Height     700mm (27.55")
• Width     450mm (17.71")
• Depth     450mm (17.71")
• Weight     34kg (74.8lbs)

 
High Frequency Compression Driver:

• Throat Exit Diameter/ Diaphragm Size     1" / 1.75"
• Diaphragm Material     Nitride Titanium
• Magnet Type     Neodymium
• Mid/ High Horn Coverage Horizontal/ Vertical     90° x 40° rotatable
• High Frequency Amplifier requirement     100W from EPAK 2500/R

 
Speaker Input /Output:

• Input only EP6